In Colorado’s dry climate, cabinet refacing usually lasts longer than painting. Painted wood doors shrink and swell as indoor humidity swings between winter and summer, which cracks paint at the joints and leads to chips on high-touch edges. Refacing replaces doors and drawer fronts with new, factory-finished pieces and covers the frames in veneer or laminate.
Key takeaways
- Paint is a thin film over wood that keeps moving. In a dry, heated Colorado home, that movement shows up as hairline cracks where door parts meet.
- Refacing gives you new doors, new drawer fronts and a new surface on the cabinet frames, so you also get to change the door style, not just the color.
- Painting costs less up front. Refacing costs more, but you are paying for new parts instead of a coating over old ones.
- Painting makes sense for solid doors you already like on a tight budget. Refacing makes sense when you want a new look that holds up to daily use.
If you’re weighing the two for your kitchen, our cabinet refacing service in the Denver area is a good place to see what refacing includes.
Why does cabinet paint crack and chip in Colorado?
Wood never stops reacting to the air around it. When the air is dry, wood gives up moisture and shrinks. When humidity rises, it swells again. The U.S. Forest Products Laboratory’s Wood Handbook recommends a lower moisture content for interior woodwork in dry areas of the country (about 6 percent) than in most of the U.S. (about 8 percent). It also notes that wood in heated buildings often over-dries during northern winters.
That’s daily life on the Front Range. Our summers are short and sunny, our winters are dry, and forced-air heat pulls even more moisture out of the air from October through April. Your cabinet doors go through that cycle every year.
Here’s why that matters for paint:
- Paint cracks at the joints. Most cabinet doors are built from several pieces of wood: a frame plus a center panel. The Wood Handbook’s chapter on finishing wood explains that paint “usually cracks at the joint between two pieces of wood,” because each piece moves a different amount. On a cabinet door, that’s the line where the rails meet the stiles and around the center panel.
- No coating stops moisture completely. The same chapter notes that “no coating is entirely moisture proof.” A good paint slows moisture change. It can’t stop the wood underneath from moving.
- Edges take the abuse. Door edges near the sink, trash pull-out and dishwasher get grabbed, bumped and wiped every day. Once a crack or chip opens there, water from cleaning can get under the paint and it starts to lift.
None of this means painted cabinets fail overnight. A careful, professional paint job with proper prep can look good for years. But in a dry climate, paint is a coating that has to keep up with a moving surface, and the joints and edges are where it loses.
How do refaced and painted cabinets compare?
Refacing and painting both keep your cabinet boxes in place. The difference is what goes on the outside.
| Painting cabinets | Cabinet refacing | |
|---|---|---|
| What changes | Color only; same doors and drawer fronts | New doors and drawer fronts; frames covered in matching veneer or laminate |
| Door style | Stays the same | Your choice of new style (shaker, slab, raised panel and more) |
| Finish | Paint brushed or sprayed on site over the old finish | Factory-made doors and new veneer or laminate surfaces |
| How it handles dry air | Paint can crack at door joints as wood shrinks | No site-applied paint film on the frames to crack |
| Hardware and hinges | Usually reused | New hinges and hardware; soft-close is an easy add |
| Typical national cost | About $2,000 to $4,500 for professional refinishing | About $4,300 to $10,000 |
Cost ranges are national figures from Angi (2025 data). Your price depends on kitchen size, door style and material.
What does cabinet refacing replace?
Refacing keeps the parts of your kitchen that are expensive and disruptive to replace: the cabinet boxes, countertops, sink, plumbing and wiring. Then it replaces everything you see and touch.
- Doors and drawer fronts. New doors are made to fit your openings. You can pick a new style and color instead of living with the profile you have now. Browse our cabinet door samples and color samples to see the options.
- Cabinet frames and exposed sides. These get covered with veneer or laminate that matches the new doors, so every visible surface looks new.
- Hinges and hardware. New hinges go on with the new doors, and new pulls and knobs finish the look.
- Optional upgrades. Many homeowners add soft-close hinges, pull-out organizers or new drawer boxes during the same visit. Our post on whether to replace drawer boxes when refacing walks through that choice.
The material you choose matters too. Solid wood, wood veneer and laminate each handle Colorado’s dry air a little differently. Our post on cabinet refacing materials: solid wood vs. veneer vs. laminate compares them side by side.
Is painting cabinets cheaper than refacing?
Yes, up front. Angi puts professional cabinet refinishing at roughly $1,991 to $4,498 nationally, and refacing at roughly $4,300 to $10,000. A DIY paint job can cost far less in materials, though it takes many days of sanding, priming and drying, and the results depend on your prep.
The fair comparison looks past day one:
- Painting refreshes the color. You keep the same doors, the same door style and the same worn hinges.
- Refacing gives you new parts. You’re buying new doors, new surfaces and new hardware, which is closer to a new kitchen than a new color.
- Touch-ups add up. If painted doors chip near the sink or the trash pull-out, you’ll be touching up or repainting sooner than you planned.
Refacing still costs much less than tearing out and replacing cabinets. For Denver-area pricing on your kitchen, try our cabinet refacing cost estimator.
When is painting the better choice?
We’d rather you pick the right project than the bigger one. Painting can be the smarter call when:
- Your doors are solid wood, in good shape, and you like their style.
- You only want a color change and your budget is firm.
- You plan to sell soon and want a quick cosmetic refresh.
- The cabinets are in a low-use space, like a laundry room or a guest bath.
When is refacing the better choice?
Refacing is usually worth it when:
- Your doors are dated, warped, peeling or damaged, or the style no longer fits your home.
- You’ve already painted once and it’s chipping again.
- The kitchen gets heavy daily use from a busy family.
- You want new hardware, soft-close hinges or better storage at the same time.
- Your cabinet boxes are sturdy and the layout works, so a full tear-out would be money spent on parts you don’t need to replace.
Refacing also moves quickly. Most kitchens take only a few days of work on site. See 5 advantages of cabinet refacing over full cabinet renovation for how it compares with replacing cabinets.
How do you keep cabinets looking good in a dry climate?
Whichever path you choose, a few habits help any cabinet finish last in a Colorado home:
- Watch your indoor humidity. The EPA recommends keeping indoor humidity below 60 percent, ideally between 30 and 50 percent. A whole-home or room humidifier in winter helps your cabinets, wood floors and trim.
- Wipe spills and drips quickly, especially at the sink base and around the dishwasher.
- Keep steam and heat off the doors. Run the range hood fan and avoid running small appliances that vent steam right under an upper cabinet.
- Use the hardware. Pulls and knobs protect door edges from hand oils and fingernails.
- Clean gently. A soft cloth with mild soap and water is safer for most finishes than abrasive pads or strong cleaners.
Cabinet refacing vs. painting FAQs
Does painted cabinet finish last in Colorado? It can, with careful prep and a quality coating, but dry air works against it. Wood doors shrink in Colorado’s dry winters and swell slightly in summer. That movement stresses the paint film, and cracks tend to appear first where door frames meet center panels. High-touch doors near the sink and trash pull-out usually chip first.
Is refacing worth it over painting? Refacing is worth it if you want a new door style, your current doors are worn or damaged, or a previous paint job is already chipping. You get new doors, drawer fronts, frame surfaces and hardware instead of a new coat over old parts. If your doors are solid and you only want a new color, painting may be enough.
How long does cabinet refacing take compared to painting? Both usually take several days of work in your home. Refacing has a wait before install while your new doors are made to measure, but your kitchen works normally during that time. Professional painting includes sanding, priming, coats and cure time, and doors are often off for most of the project.
Can you reface cabinets that have already been painted? In many kitchens, yes, because refacing replaces the doors and drawer fronts and puts new veneer or laminate over the frames. The cabinet boxes need to be solid, so we look at their condition during your free in-home estimate.
What’s the most durable option for a busy Denver kitchen? For heavy daily use, refacing with new factory-finished doors and veneer or laminate surfaces is generally more durable than a painted finish. Laminate is especially easy to clean. Ask to see samples of each material during your estimate so you can compare look, feel and care.
Get a kitchen that holds up to Colorado
If you’re tired of chipped paint or dated doors, refacing gives you a new kitchen look without tearing anything out. Home Improvements of Colorado refaces kitchens and bathroom vanities in Denver, Aurora, Littleton, Lakewood, Parker, Highlands Ranch, Thornton, Castle Rock and across the Denver metro.
Start with our cabinet refacing service page, then schedule your free in-home estimate. We’ll bring door styles and colors to your home and give you a written quote.
